Lost Mary BM6000 Pods and Refill Packs Explained
A clear UK guide to Lost Mary BM6000 pods and refills, from the QUAQ coil and Maryliq containers to which pods fit and when to replace them.
The short answer
A 2ml pod with a coil, topped up by a 10ml refill.
The coil
A built-in QUAQ mesh coil for fuller flavour.
Fits
BM6000 pods suit the BM6000 only.
Lost Mary BM6000 pods and refills explained
The BM6000 keeps its pods and refills refreshingly simple. A prefilled pod holds 2ml of e-liquid with a built-in QUAQ mesh coil, fed by a 10ml Maryliq refill container, together giving around 6000 puffs before the pod is replaced. The pod clicks onto the top of the device.
This guide explains the two ways to run the kit, prefilled or self-filled, what the QUAQ coil does and which pods actually fit. It also covers when to replace a pod rather than refill it, so nothing goes to waste.
Getting the pod system straight makes the whole kit easier to live with. Once you know how the pod and refill work together, topping up and swapping become quick, tidy jobs you barely think about.
Prefilled pods versus refill containers
There are two parts to the system and it helps to keep them clear. The pod is the small 2ml part with the coil that clicks onto the device, while the refill container is the larger 10ml bottle of Maryliq that feeds liquid into it.
- Prefilled pod: ready filled, with the QUAQ mesh coil built in.
- Refill container: a 10ml Maryliq bottle that tops the pod up.
- Together: around 12ml of liquid and roughly 6000 puffs per set.
- Self-fill option: empty pods let you add your own Maryliq flavour.
What the QUAQ coil does
The coil inside the pod is the heart of the flavour. The QUAQ mesh coil heats the e-liquid evenly, which gives a fuller taste and smoother vapour than older round-wire coils. It stays sealed inside the pod for the pod's whole life.
Because the coil is built into the pod, you never handle it directly or change it on its own. When the coil eventually tires, you simply fit a fresh pod and the new coil brings the flavour straight back.
Looking for BM6000 pods and refills?
Vape Chaos stocks the full Lost Mary BM6000 pod and Maryliq refill range. Call the team if you want help picking a flavour.
To see the full choice of pods, refills and complete kits in one place, browse the Lost Mary collection and pick the flavours and spares that suit you.
Which pods fit the BM6000
Compatibility matters, since not every Lost Mary pod fits every device. BM6000 pods are made exclusively for the BM6000 and will not work with other models such as the BM600 or QM600, so always match the pod to the device.
| Part | Detail | Notes |
|---|---|---|
| Prefilled pod | 2ml, QUAQ mesh coil | Clicks onto the top of the device |
| Refill container | 10ml Maryliq | Feeds the pod for a longer life |
| Flavours | Over 30 options | Wide fruit, menthol and dessert range |
| Fits | BM6000 only | Not the BM600 or QM600 |
For every related how-to in one library, the Lost Mary Guides hub is the place to start.
It pairs neatly with a few sibling guides. Our refill and pod change guide shows the click-fill routine, the prefilled versus refillable guide weighs up the two options and the Maryliq nic salt guide explains the e-liquid inside.
When to replace a pod
A pod earns its keep across several refills before it is done. Keep topping the pod up while the flavour stays clean, then fit a fresh pod once the taste fades or turns slightly harsh, since that means the built-in coil has worn out.
Buying pods in a multipack is the tidy way to stay ahead, so a spare is always waiting when a coil finally tires. That way a swap takes seconds and you never have to pause your favourite flavour for long.
Prefilled or self-fill: which suits you
The BM6000 happily works either way, so it comes down to what you want from it. Prefilled pods are the simplest route, ready to click on and vape, while self-fill empty pods give you free rein over flavour and strength.
Most people start with prefilled pods and refill containers for the ease and the sealed, mess-free coil. Vapers who like to mix things up often move to empty pods so they can run any Maryliq flavour they fancy. Neither is better, they simply suit different tastes. You can switch between them whenever you like.
Getting the best from your pods
A little care keeps each pod at its best. Prime a fresh pod before the first puff, refill before it runs dry and store spare pods upright in a cool place away from direct sun so the liquid stays fresh.
Chain vaping is the main thing that shortens a pod, since it never gives the wick a chance to catch up. Gentle, steady draws let the QUAQ coil do its job and keep the flavour full right through to the last refill.
The bottom line: the Lost Mary BM6000 uses a 2ml prefilled pod with a built-in QUAQ mesh coil, topped up by a 10ml Maryliq refill container for around 6000 puffs per set. The pods click onto the top of the device and fit the BM6000 only. Refill while the flavour stays clean and swap the whole pod once it fades, keeping a spare handy so a change never slows you down.
Stock up on pods and Maryliq
Browse the full BM6000 pod and refill range at Vape Chaos and keep a spare ready for the moment you need it.
Frequently asked questions
What pods does the Lost Mary BM6000 use?
The BM6000 uses a 2ml prefilled pod with a built-in QUAQ mesh coil, which clicks onto the top of the device. Each pod is fed by a larger 10ml Maryliq refill container, giving around 6000 puffs per set. There are also empty pods for anyone who prefers to fill their own Maryliq flavour and strength.
What is the difference between the pod and the refill container?
The pod is the small 2ml part that holds the coil and clicks onto the device, while the refill container is the larger 10ml Maryliq bottle that tops the pod up. You keep refilling the same pod from the container until the coil tires, then fit a fresh pod. Together they hold around 12ml of liquid.
Can you reuse a BM6000 pod?
You reuse a pod across several refills while the flavour stays clean, since the coil is built to last through more than one fill. Once the taste fades or turns slightly harsh, the coil is spent and it is time for a new pod. The coil cannot be changed on its own, so the whole pod is replaced.
Do BM6000 pods fit other Lost Mary vapes?
No. BM6000 pods are made exclusively for the BM6000 and will not fit other models such as the BM600 or QM600. Always match the pod to your exact device to be sure it clicks in and seals properly. Using the correct pod also keeps the QUAQ coil performing the way it should.
What is a QUAQ coil?
QUAQ is Lost Mary's mesh coil technology, built into every BM6000 pod. A mesh coil heats the e-liquid more evenly than an older round-wire coil, which gives a fuller flavour and smoother vapour. Because it is sealed inside the pod, you never handle it directly. A fresh pod simply brings a fresh coil with it.
